For Wireless Network Interface Users In Infrastructure Mode - Oce cx2100 Quick Setup Manual

STEP 2
Installing the Driver & Software

For Wireless Network Interface Users in infrastructure mode

3
(For Windows
Edition/Windows Vista
Connecting your wireless machine and wireless network together and
installing the printer driver in infrastructure mode
First you must configure the wireless network settings of your machine to communicate with your network access
point (router). After the machine is configured to communicate with your access point (router) computers on your
network will have access to the machine. To use the machine from these computers, you will need to install the
Multi-Function Suite. The following steps will guide you through the configuration and installation process.
To achieve optimum results with normal every day document printing, place the cx2100 as close to the network
access point (router) as possible with minimal obstructions. Large objects and walls between the two devices as
well as interference from other electronic devices can affect the data transfer speed of your documents.
Important
The following instructions will offer two methods for installing your cx2100 in a wireless network
environment. Both methods are for infrastructure mode, using a wireless router or access point that
uses DHCP to assign IP addresses. If your wireless router/access point supports SecureEasySetup™
follow the steps on page 24 Using the SecureEasySetup™ software to configure your machine for a
wireless network. If your wireless router/access point does not support SecureEasySetup™ follow the
steps on page 25 Using the Setup Wizard from the control panel LAN menu for wireless network
configuration. To set up your machine in any other wireless environment you can find instructions in
the Network User's Guide on the CD-ROM.
You can view the Network User's Guide by following the instructions below.
1 Turn on your computer. Insert the
2 If the language screen appears, click your language. The CD-ROM main menu will appear.
3 Click the Documentation.
4 Click the PDF documents.
5 Click the NETWORTK USER'S GUIDE.
Note
• If you are going to connect the printer to your network, we recommend that you contact your system
administrator prior to installation.
• If you are using personal firewall software (e.g. Windows
print, restart your personal firewall software.
22
®
2000 Professional/XP/ XP Professional x64
®
)
CD-ROM into your CD-ROM drive.
Océ
®
Firewall), disable it. Once you are sure that you can
®
Windows