Spark Arrester Cleaning (For Usa) - Yamaha WR426F(P) Owner's Service Manual

SPARK ARRESTER CLEANING (For USA)

1
1
1
SPARK ARRESTER CLEANING (For USA)
WARNING
Be sure the exhaust pipe and muffler are
G
cool before cleaning the spark arrester.
Do not start the engine when cleaning the
G
exhaust system.
1. Remove:
Bolt (spark arrester) 1
G
2. Remove:
Spark arrester 1
G
Pull the spark arrester out of the muf-
fler.
3. Clean:
Spark arrester
G
Tap the spark arrester lightly, then use
a wire brush to remove any carbon
deposits.
4. Install:
Spark arrester
G
Insert the spark arrester into the muffler
and align the bolt holes.
Bolt (spark arrester)
G
3 - 25
INSP
ADJ
10 Nm (1.0 m · kg, 7.2 ft · lb)