Yamaha WR426F(P) Owner's Service Manual page 230

1 Throttle cable
2 Lights switch
3 Lights switch lead
4 Clamp
5 Decompression cable
6 Clutch cable
7 Hose guide
8 Trip meter
9 Brake hose
0 "ENGINE STOP" button lead
CABLE ROUTING DIAGRAM
Å Fasten the "ENGINE STOP" button lead to the handlebar with the
plastic band.
ı Pass the throttle cables between the handle crown and trip meter.
Ç Pass the lights switch leads in front of the "ENGINE STOP" button
lead, then pass the head light lead (of the lights switch leads) in
front of the head pipe.
Î Install the trip meter cable so that its bent portion faces the chassis
rear.
‰ Install the brake hose so that it contacts the master cylinder projec-
tion and that its bent portion faces downward.
2 - 43
SPEC