Yamaha WR426F(P) Owner's Service Manual page 566

FRONT WHEEL AND REAR WHEEL
5 - 6
5. Install:
Wheel
G
NOTE:
Install the brake disc between the brake
G
pads correctly.
Make sure that the projections a in the trip
G
meter gear unit fits over the stopper b on
the front fork outer tube.
6. Install:
Wheel axle 1
G
NOTE:
Apply the lithium soap base grease on the
wheel axle.
7. Install:
Nut (wheel axle) 1
G
105 Nm (10.5 m · kg, 75 ft · lb)
8. Tighten:
Bolt (axle holder) 1
G
23 Nm (2.3 m · kg, 17 ft · lb)
NOTE:
Before tightening the bolt, fit the wheel axle to
the axle holder by stroking the front fork sev-
eral times with the front brake applied.
CHAS