Cleaning The Spark Arrester - Yamaha TTR 125 2023 Manual

8. Install the sponge material onto
the frame, place the air filter ele-
ment in the original position on the
guide, and then tighten the wing
nut.
1. Air filter sponge material
2. Washer
3. Wing nut
9. Insert the air filter element into the
air filter case. NOTICE: Make
sure that the air filter element is
properly seated in the air filter
case. The engine should never
be operated without the air filter
element installed, otherwise the
piston(s) and/or cylinder(s) may
become excessively
[ECA10482]
Periodic maintenance and adjustment
10. Install the air filter case cover by
installing the band.
11. Install the panel.
Checking and cleaning the air filter
case check hoses
1. Check the air filter case check
hoses for accumulation of dust or
water.
1. Air filter check hose plug
2. Air filter check hose
2. If dirt or water is visible, remove
the hoses, clean them, and then
install them.
worn.

Cleaning the spark arrester

The spark arrester should be cleaned
at the intervals specified in the periodic
maintenance and lubrication chart.
 Always let the exhaust system
 Do not start the engine when
1
TIP
2
Make sure to select a well-ventilated
area free of combustible materials to
clean the spark arrester.
1. Remove the spark arrester cap by
7-12
WARNING
cool prior to touching exhaust
components.
cleaning the exhaust system.
removing the bolts, and then pull
the spark arrester out of the muf-
fler.
EAUW0451
EWA10981
7