Pre-Configure The Hp Upd Default Settings Using Hp Driver Configuration Utility - HP 2605dn Print Drivers System Administrator Manual

The PARK is a collection of tools, scripts and documentation to help print administrators install,
deploy, configure and manage the HP Universal Print Driver.
NOTE: See
information on installing and using the Active Directory template.
The following settings are available for preconfiguration and are located in the Default Print Settings
section of the HP UPD AD Admin Templates:
●
Duplex
●
Economode
●
Private Printing with PIN
●
Edgeline QAC
●
Services tab
●
Status Notification Pop–ups
HP UPD policy management capabilities are disabled by default. To take advantage of the
management capabilities through the Group Policy Objects on new and existing queues, the HP UPD
management capabilities must be enabled. Please see the example below for steps on enabling
policy management for existing queues.
Pre-configure the HP UPD default settings using
HP Driver Configuration Utility
The HP Driver Configuration Utility (DCU) is a Windows application used to edit the configuration file
associated with a particular driver. The configuration file controls the print driver settings and takes
effect when the driver is installed.
The HP Driver Configuration Utility does not handle any part of the deployment or installation of the
driver. Rather, the default configuration file is modified and saved back to the same driver directory in
which it was opened. The HP Driver Configuration Editor is intended for use in environments where
there is an established process for deploying drivers.
The DCU utility provides the most comprehensive list of configurable options and settings, but it does
not include all of the available options. In some cases, the DCU is the only method to configure a
specific driver setting. It may become necessary to combine some of the pre-configuration tools to get
a completely configured driver for your environment. Please refer to the readme notes for additional
information on using the DCU.
NOTE: The DCU is included with the HP Printer Administrator´s Resource Kit (PARK). To download
the PARK, which includes the DCU software and the HP Driver Configuration Support Guide, go to
http://www.hp.com/go/upd
operating system (the DCU is supported on both 32 and 64–bit systems). From the table that lists the
HP Printer Administrator´s Resource Kit, click Download.
Sample list of the features available within the DCU.
●
Print on both sides (duplex)
●
Paper Size
18 Chapter 4 Pre-configure the default settings and print policy for HP UPD
Manage the HP UPD with Active Directory Group Policy on page 151
and select Download software. Verify your language and then your
for detailed
ENWW