Using The Hp Mfp Dss Configuration Utility; Using The Activity Log - HP T1936AA - Digital Sending Software Support Manual

4
To determine if the DSS
Administrative Tools, and then click Services. Check the status column for the HP MFP Digital
Sending Software. If the service is running, Status should have a value of Started. Also, if the
service is running, the Stop button should be available.

Using the HP MFP DSS Configuration Utility

You can reach the HP MFP DSS Configuration Utility through either of the following:
See the HP MFP DSS Configuration Utility Help file for detailed information about configuration
options.
To reach configuration options through the administrator computer
1

Using the activity log

The activity log is an important tool for monitoring digital sending activities. Up to 1,024 entries
are stored in the activity log. New events overwrite the oldest events. See the HP MFP DSS
Configuration Utility Help file for a list and explanation of the messages.
Clearing the log is useful if you are troubleshooting problems. After you clear the log, entries
reflect only current conditions. Clearing the log is also useful when you have made major
configuration changes.
Icons appear in the activity log to identify the type of message:
Events recorded in activity log
22 Chapter 2 - Support tools and procedures
Click either the Start, Stop, or Restart button.
4
Administrator computer on which the utility is installed
A web browser running HP Web Jetadmin with the HP DSS configuration plugin
From the computer on which HP DSS v.
Programs. Point to Hewlett-Packard, point to the HP MFP Digital Sending Software
program group, and then click Configuration Utility.
information
No action required.
warning
Indicates a failure of some kind that might require action.
Generally, the MFP can still be used for other functions.
error
Indicates a problem that requires administrator
intervention and possibly a call to an HP-authorized
dealer.
Each digital sending job (for all types of destinations)
Success or failure of an activity
Shutdown and restart
Deletion of address book contents
System errors
service is running, go to Start, click on Control Panel, click
is installed, click Start and then point to
4
ENWW