HP 6125XLG Command Reference Manual page 7

Mux action
Par action
Flags
Link fault
Dying gasp
Critical event
Local evaluating
Remote evaluating : COMPLETE
Packets statistic
Packet type
-----------------------------------------------------------------
OAMPDU
OAMInformation
OAMEventNotification
OAMUniqueEventNotification
OAMDuplicateEventNotification
Table 1 Command output
Field
Ten-GigabitEthernet1/1/5
Enable status
Loopback status
Link status
OAM mode
PDU
Mux action
Par action
Flags
: FWD
: FWD
: Not occurred
: Not occurred
: Not occurred
: COMPLETE
Sent
64
36
36
0
Description
Information on Ten-GigabitEthernet 1/1/5.
Ethernet OAM state (enabled or disabled).
Ethernet OAM loopback state:
•
No loopback.
•
Remote loopback.
•
Local loopback.
Link state (UP or DOWN).
Local Ethernet OAM mode:
•
Active—The port operates in the active Ethernet OAM mode.
•
Passive—The port operates in the passive Ethernet OAM mode.
The way in which the local end processes Ethernet OAMPDUs:
•
RX_INFO—The port only receives Information OAMPDUs and does not
send any Ethernet OAMPDUs.
•
LF_INFO—The port only sends the Information OAMPDUs without
Information TLV triplets and with their link error flag bits being set.
•
INFO—The port sends and receives only Information OAMPDUs.
•
ANY—The port sends and receives Ethernet OAMPDUs of any type.
Operating mode of the local transmitter:
•
FWD—The port can send any packets.
•
DISCARD—The port only sends Ethernet OAMPDUs.
Operating mode of the local receiver:
•
FWD—The port can receive any packets.
•
DISCARD—The port only receives Ethernet OAMPDUs.
•
LB—The local receiver is in loopback state. All the packets, other than
Ethernet OAMPDUs, received on the local receiver are returned to their
sources along their original routes.
Local flags inserted in the local flag fields of the Ethernet OAMPDUs sent.
100
2
Received
80
60
20
10
10