HP 6125XLG Command Reference Manual page 59

Syntax
display dldp statistics [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies a port by its type and number.
Usage guidelines
If no port is specified, this command displays the statistics on the DLDP packets passing through all the
DLDP-enabled ports.
Examples
# Display the statistics on the DLDP packets passing through all the DLDP-enabled ports.
<Sysname> display dldp statistics
Interface Ten-GigabitEthernet1/1/5
Packets sent: 6
Packets received: 5
Invalid packets received: 2
Loopback packets received: 0
Authentication-failed packets received: 0
Valid packets received: 3
Interface Ten-GigabitEthernet1/1/6
Packets sent: 7
Packets received: 7
Invalid packets received: 3
Loopback packets received: 0
Authentication-failed packets received: 0
Valid packets received: 4
Table 17 Command output
Field
Interface
Packets sent
Packets received
Invalid packets received
Loop packets received
Authentication failed packets received
Valid packets received
Description
Port index.
Total number of DLDP packets sent.
Total number of DLDP packets received.
Number of the invalid packets received.
Number of the loopback packets received.
Number of the received packets that failed to pass the authentication.
Number of the valid packets received.
54