HP 6125XLG Command Reference Manual page 88

<Sysname> display vrrp ipv6 verbose
IPv6 Virtual Router Information:
Running Mode
Total number of virtual routers : 1
Interface Vlan-interface2
VRID
Admin Status
Config Pri
Preempt Mode
Auth Type
Virtual IP
Virtual MAC
Master IP
VRRP Track Information:
Track Object
Table 25 Command output (in standard mode)
Field
Running Mode
Total number of virtual routers
Interface
VRID
Adver Timer
Admin Status
State
Config Pri
Running Pri
Preempt Mode
Delay Time
Auth Type
Virtual IP
Virtual MAC
: Standard
: 1
: Up
: 150
: Yes
: None
: FE80::1
: 0000-5e00-0201
: FE80::2
: 1
Description
VRRP operating mode (standard mode).
Total number of VRRP groups.
Interface where the VRRP group is configured.
Virtual router ID (VRRP group number).
VRRP advertisement sending interval in centiseconds.
Administrative status: up or down.
Status of the router in the VRRP group:
•
Master.
•
Backup.
•
Initialize.
•
Inactive.
Configured priority of the router, which is configured through the vrrp ipv6
vrid priority command.
Current priority of the router.
When a track entry is associated with a VRRP group on the router, the
router's priority changes when the track entry's status changes.
Preemptive mode:
•
Yes.
•
No.
Preemption delay time in seconds.
Authentication type. Only none is available. That is, no authentication is
required.
Virtual IP address of the VRRP group.
Virtual MAC address of the VRRP group's virtual IP address, which is
displayed when the router is the master.
Adver Timer : 100
State : Master
Running Pri : 150
Delay Time : 10
State : Positive
83
Pri Reduced : 50