Bfd Multi-Hop Destination-Port; Bfd Multi-Hop Detect-Multiplier - HP 6125XLG Command Reference Manual

plain: Sets a plaintext password.
plain-string: Sets the plaintext password, which is a case-sensitive string of 1 to 16 characters.
Usage guidelines
Use this command to enhance BFD session security.
For security purposes, all authentication passwords, including passwords configured in plain text, are
saved in cipher text.
Examples
# Configure the simple authentication mode for multi-hop BFD control packets, setting the authentication
key ID to 1 and password to 123456.
<Sysname> system-view
[Sysname] bfd multi-hop authentication-mode simple 1 plain 123456

bfd multi-hop destination-port

Use bfd multi-hop destination-port to configure the destination port number for multi-hop BFD control
packets.
Use undo bfd multi-hop destination-port to restore the default.
Syntax
bfd multi-hop destination-port port-number
undo bfd multi-hop destination-port
Default
The destination port number for multi-hop BFD control packets is 4784.
Views
System view
Predefined user roles
network-admin
Parameters
port-number: Specifies the destination port number of multi-hop BFD control packets, 3784 or 4784.
Examples
# Configure the destination port number for multi-hop BFD control packets as 3784.
<Sysname> system-view
[Sysname] bfd multi-hop destination-port 3784

bfd multi-hop detect-multiplier

Use bfd multi-hop detect-multiplier to configure the multi-hop detection time multiplier.
Use undo bfd multi-hop detect-multiplier to restore the default.
Syntax
bfd multi-hop detect-multiplier value
undo bfd multi-hop detect-multiplier
107