HP 6125XLG Command Reference Manual page 120

Interface:
Protocol: IPv4
Table 33 Command output
Field
Track ID
State
notify 13 seconds later
Duration
Notification delay: Positive 20,
Negative 30 (in seconds)
Tracked object
NQA entry
Reaction
BFD session mode
Outgoing interface
VPN instance name
Remote IP
Local IP
Interface
Protocol
Related commands
• track bfd echo
track interface
•
• track interface protocol
track nqa
•
Vlan-interface3
Description
ID of a track entry.
States of a track entry:
•
•
•
The Track module notifies the application modules of the track entry
state change 13 seconds later. The information is not displayed after
the Track module notifies the application modules.
Time period during which the track entry stays in the state.
•
•
Tracked object associated with the track entry.
NQA test group associated with the track entry.
Reaction entry associated with the track entry.
BFD session mode. Only echo mode is supported.
Outgoing interface of BFD echo packets.
Name of VPN instance to which BFD session packets belong. If the
packets belong to a public network, a hyphen (-) is displayed.
Remote IP address of the BFD echo packets.
Local IP address of the BFD echo packets.
Interface to be monitored.
Link states or Layer 3 protocol states of the monitored interface:
•
•
•
Positive—The tracked object functions properly.
NotReady—The tracked object is invalid.
Negative—The tracked object is abnormal.
The Track module notifies the application modules that the status
of the track entry changes to Positive after a delay time of 20
seconds.
The Track module notifies the application modules that the status
of the track entry changes to Negative after a delay time of 30
seconds.
None—Link status of the monitored interface.
IPv4—IPv4 protocol status of the monitored Layer 3 interface.
IPv6—IPv6 protocol status of the monitored Layer 3 interface.
115