Dldp Delaydown-Timer; Dldp Enable - HP 6125XLG Command Reference Manual

dldp delaydown-timer

Use dldp delaydown-timer to set the DelayDown timer.
Use undo dldp delaydown-timer to restore the default.
Syntax
dldp delaydown-timer time
undo dldp delaydown-timer
Default
The setting of the DelayDown timer is 1 second.
Views
System view
Predefined user roles
network-admin
Parameters
time: Specifies the DelayDown timer in the range of 1 to 5 seconds.
Usage guidelines
The DelayDown timer configured by using this command applies to all DLDP-enabled ports.
Examples
# Set the DelayDown timer to 2 seconds.
<Sysname> system-view
[Sysname] dldp delaydown-timer 2
Related commands
display dldp

dldp enable

Use dldp enable to enable DLDP on a port.
Use undo dldp enable to disable DLDP on a port.
Syntax
dldp enable
undo dldp enable
Default
DLDP is disabled on a port.
Views
Ethernet interface view
Predefined user roles
network-admin
57