Dldp Unidirectional-Shutdown - HP 6125XLG Command Reference Manual

Syntax
dldp interval time
undo dldp interval
Default
The interval for sending Advertisement packets is 5 seconds.
Views
System view
Predefined user roles
network-admin
Parameters
time: Specifies the interval for sending Advertisement packets, in the range of 1 to 100 seconds.
Usage guidelines
This command applies to all DLDP-enabled ports.
To enable DLDP to operate properly, make sure the intervals for sending Advertisement packets
configured on the two ends of a link are the same.
Examples
# Set the interval for sending Advertisement packets to 20 seconds.
<Sysname> system-view
[Sysname] dldp interval 20
Related commands
display dldp

dldp unidirectional-shutdown

Use dldp unidirectional-shutdown to set the port shutdown mode.
Use undo dldp unidirectional-shutdown to restore the default.
Syntax
dldp unidirectional-shutdown { auto | manual }
undo dldp unidirectional-shutdown
Default
The port shutdown mode is auto mode.
Views
System view
Predefined user roles
network-admin
Parameters
auto: Configures the port shutdown mode as auto mode. In this mode, when DLDP detects a
unidirectional link, it shuts down the Unidirectional port.
59