Reset Dldp Statistics - HP 6125XLG Command Reference Manual

manual: Configures the port shutdown mode as manual mode. In this mode, when DLDP detects a
unidirectional link, DLDP does not shut down the involved port and you need to manually shut it down.
When the link state is restored to Bidirectional, you must manually bring up the port.
Examples
# Set the port shutdown mode to manual mode.
<Sysname> system-view
[Sysname] dldp unidirectional-shutdown manual
Related commands
display dldp

reset dldp statistics

Use reset dldp statistics to clear the statistics on DLDP packets passing through a port.
Syntax
reset dldp statistics [ interface interface-type interface-number ]
Views
User view
Predefined user roles
network-admin
Parameters
interface interface-type interface-number: Clears the statistics on DLDP packets passing through a port.
interface-type interface-number represents a port by its type and number.
Usage guidelines
If no port is specified, this command clears the statistics on the DLDP packets passing through all the
DLDP-enabled ports.
Examples
# Clear the statistics on the DLDP packets passing through all the DLDP-enabled ports.
<Sysname> reset dldp statistics
Related commands
display dldp statistics
60