HP 6125XLG Command Reference Manual page 9

Blade switch high availability command reference
Table of Contents

Advertisement

Local evaluating
Remote evaluating : COMPLETE
Table 2 Command output
Field
Ten-GigabitEthernet1/1/5
OAM mode
MAC address
MTU size
Mux action
Par action
Configuration
Unidirectional
Remote loopback
Link events
MIB retrieval
Flags
Link fault
Dying gasp
Critical event
Local evaluating
Remote evaluating
: COMPLETE
Description
Information on Ten-GigabitEthernet 1/1/5.
Local Ethernet OAM mode:
Active—The port operates in the active Ethernet OAM mode.
Passive—The port operates in the passive Ethernet OAM mode.
MAC address of the remote end.
MTU size, in bytes.
Operating mode of the remote transmitter:
FWD—The port can send any packets.
DISCARD—The port only sends Ethernet OAMPDUs.
Operating mode of the remote receiver:
FWD—The port can receive any packets.
DISCARD—The port only receives Ethernet OAMPDUs.
LB—The local receiver is in loopback state. All the packets, other than
Ethernet OAMPDUs, received on the local receiver are returned to their
sources along their original routes.
Configuration of the remote Ethernet OAM entity.
Indicates whether unidirectional transmission is supported.
Indicates whether Ethernet OAM remote loopback is supported.
Indicates whether Ethernet OAM link error events are supported.
Indicates whether MIB variable retrieval is supported.
Values of the peer Ethernet OAM flag fields in OAM packets.
Indicates whether an Ethernet OAM link error is present.
Indicates whether a fatal error is present.
Indicates whether a critical error is present.
Indicates whether the local-to-remote configuration negotiation is
complete:
COMPLETE—The negotiation is completed.
NOTCOMPLETE—The negotiation is uncompleted.
RESERVED—The field is reserved and the negotiation is uncompleted.
UNSATISFIED—The remote end is not satisfied with the local
configuration and the negotiation is uncompleted.
Indicates whether the remote-to-local configuration negotiation is
complete:
COMPLETE—The negotiation is completed.
NOTCOMPLETE—The negotiation is uncompleted.
UNSATISFIED—The remote end is not satisfied with the local
configuration and the negotiation is uncompleted.
4

Advertisement

Table of Contents
loading

Table of Contents