Bfd Multi-Hop Min-Receive-Interval - HP 6125XLG Command Reference Manual

Default
The multi-hop detection time multiplier is 5.
Views
System view
Predefined user roles
network-admin
Parameters
value: Specifies the multi-hop detection time multiplier in the range of 3 to 50.
Usage guidelines
The detection time multiplier determines the maximum number of concurrent BFD control packets that can
be discarded.
Table 31 Detection interval calculation method
Mode
Control
asynchronous mode
Control packet mode BFD session in demand
mode
Examples
# Configure the multi-hop detection time multiplier as 6.
<Sysname> system-view
[Sysname] bfd multi-hop detect-multiplier 6

bfd multi-hop min-receive-interval

Use bfd multi-hop min-receive-interval to configure the minimum interval for receiving multi-hop BFD
control packets.
Use undo bfd multi-hop min-receive-interval to restore the default.
Syntax
bfd multi-hop min-receive-interval value
undo bfd multi-hop min-receive-interval
Default
The minimum interval for receiving multi-hop BFD control packets is 400 milliseconds.
Views
System view
Predefined user roles
network-admin
packet mode BFD
Detection interval
session in Detection time multiplier of the receiver × actual
packet sending interval of the receiver
Detection time multiplier of the sender × actual
packet sending interval of the sender
108