Oam Errored-Frame-Seconds Window - HP 6125XLG Command Reference Manual

Default
The port uses the global setting.
Views
Ethernet interface view
Predefined user roles
network-admin
Parameters
threshold-value: Specifies the errored frame seconds event triggering threshold in the range of 0 to 900.
Usage guidelines
The value of the errored frame seconds event triggering threshold cannot be greater than the value of the
errored frame seconds event detection window (in seconds). Otherwise, errored frame seconds events
cannot be generated.
The configuration in interface view takes effect on the specified port. For a port, the configuration in
interface view takes precedence.
Examples
# Set the errored frame seconds event triggering threshold on Ten-GigabitEthernet 1/1/5 to 100.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/1/5
[Sysname-Ten-GigabitEthernet1/1/5] oam errored-frame-seconds threshold 100
Related commands
display oam configuration
•
display oam link-event
•
•

oam errored-frame-seconds window

oam global errored-frame-seconds threshold
•
oam errored-frame-seconds window
Use oam errored-frame-seconds window to set the errored frame seconds event detection window.
Use undo oam errored-frame-seconds window to restore the default.
Syntax
oam errored-frame-seconds window window-value
undo oam errored-frame-seconds window
Default
The port uses the global setting.
Views
Ethernet interface view
Predefined user roles
network-admin
14