Oam Timer Keepalive; Reset Oam - HP 6125XLG Command Reference Manual

[Sysname-Ten-GigabitEthernet1/1/5] oam timer hello 600
Related commands
• display oam configuration
oam global timer hello
•

oam timer keepalive

Use oam timer keepalive to configure the Ethernet OAM connection timeout timer.
Use undo oam timer keepalive to restore the default.
Syntax
oam timer keepalive interval
undo oam timer keepalive
Default
The port uses the global setting.
Views
Ethernet interface view
Predefined user roles
network-admin
Parameters
interval: Specifies the Ethernet OAM connection timeout timer, in steps of 100 (in milliseconds). The value
range for this argument is 1000 to 25000.
Usage guidelines
After the timeout timer of an Ethernet OAM connection expires, the local OAM entity ages out its
connection with the peer OAM entity, causing the OAM connection to disconnect. To keep the Ethernet
OAM connections stable, HP recommends that you set the connection timeout timer at least five times the
handshake packet transmission interval.
The configuration in interface view takes effect on the specified port. For a port, the configuration in
interface view takes precedence.
Examples
# Set the Ethernet OAM connection timeout timer to 6000 milliseconds.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/1/5
[Sysname-Ten-GigabitEthernet1/1/5] oam timer keepalive 6000
Related commands
display oam configuration
•
oam global timer keepalive
•

reset oam

Use reset oam to clear the statistics on Ethernet OAM packets and Ethernet OAM link error events of an
Ethernet port.
29