CFD commands
cfd cc enable
Use cfd cc enable to enable CCM sending on a specified MEP.
Use undo cfd cc enable to disable CCM sending on a specified MEP.
Syntax
cfd cc service-instance instance-id mep mep-id enable
undo cfd cc service-instance instance-id mep mep-id enable
Default
The CCM sending function is disabled.
Views
Layer 2 Ethernet interface view, Layer 2 aggregate interface view
Predefined user roles
network-admin
Parameters
service-instance instance-id: Specifies the service instance ID in the range of 1 to 32767.
mep mep-id: Specifies the ID of a MEP, in the range of 1 to 8191.
Usage guidelines
Follow these guidelines when you use the command:
•
Configurations in Layer 2 Ethernet interface view take effect only on the current interface.
Configurations in Layer 2 aggregate interface view take effect on the aggregate interface and all
•
its member ports.
Configurations on a member port take effect only when the member port leaves the aggregation
•
group.
Examples
# On port Ten-GigabitEthernet 1/1/5, enable CCM sending on MEP 3 in service instance 5.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/1/5
[Sysname-Ten-GigabitEthernet1/1/5] cfd cc service-instance 5 mep 3 enable
Related commands
cfd cc interval
cfd cc interval
Use cfd cc interval to set the value of the interval field in the CCM messages.
Use undo cfd cc interval to restore default.
31