HP 6125XLG Command Reference Manual page 51

Some other MEPs are transmitting the RDI bit.
Table 12 Command output
Field
Interface
Maintenance domain
Maintenance domain index
Maintenance association
Maintenance association
index
Level
VLAN
Direction
Current state
CCM send
FNG state
CCM
Current state
Interval
SendCCM
Loopback
NextSeqNumber
SendLBR
ReceiveInOrderLBR
ReceiveOutOrderLBR
Linktrace
NextSeqNumber
SendLTR
Description
Interface to which an MD belongs.
MD to which a MEP belongs. (If the MD does not have a name, this field is
displayed as Without ID.)
Index of the MD where the MEP resides.
MA to which a MEP belongs.
Index of the MA where the MEP resides.
Level of the MD.
VLAN to which the MA belongs.
Direction of the MEPs.
State of MEP, either Active or Inactive.
Whether the MEP sends CCM.
State of FNG (Fault Notification Generator):
•
FNG_RESET.
•
FNG_DEFECT.
•
FNG_REPORT_DEFECT.
•
FNG_DEFECT_REPORTED.
•
FNG_DEFECT_CLEARING.
If this field is not supported, a hyphen (-) is displayed.
Information related to CCM.
State of CCMs sent:
•
CCI_IDLE.
•
CCI_WAITING.
If this field is not supported, a hyphen (-) is displayed.
Interval to send CCM.
Number of CCMs that have been sent by the MEPs.
If this field is not supported, a hyphen (-) is displayed.
Information related to Loopback.
Sequence number of the next LBM to be sent.
Number of LBRs that have been sent. If the MEP is inward-facing, the number
of LBRs will not be counted.
Number of LBR messages received in correct sequence.
Number of LBR messages received out of order.
Information related to linktrace.
Sequence number of the next LTM to be sent.
Number of LTRs sent. If the MEP is inward-facing, the number of LTRs will not
be counted.
46