Intermec MobileLAN access WA21 System Manual page 91

MobileLAN access System Manual
Filter Expressions Parameter Descriptions (continued)
Parameter Explanation
Value ID Represents a value in the Filter Values menu. The bytes after the frame
offset are compared to the data pattern indicated by the value. Value
ID can be from 0 to 255 and must match one or more value IDs in the
Filter Values menu.
Action Sets the action to Pass, Drop, or And. If you set the action to And, the
filter expression with the next highest sequence is applied.
Example 1
This example shows you how to use Ethernet filters to filter all traffic that
passes through the access point to the wireless network except for traffic
for specified MAC addresses. These filters do not prevent wireless traffic
from reaching the Ethernet network. For this example, set these filter
values.
Example 1 - Filter Values
Value ID Value
1 ff ff ff ff ff ff
2 00 02 2d 04 b7 a4
3 00 02 2d 0d 54 25
Chapter 3 — Configuring the Ethernet Network
Description
Allows multicast traffic to enter the wireless
network, which is necessary for IP end devices to
communicate
The MAC address of an end device you want to
be able to communicate.
The MAC address of an end device you want to
be able to communicate.
77