Intermec MobileLAN access WA21 System Manual page 77

MobileLAN access System Manual
To avoid a single point of failure, you can configure more than one access
point to be a DHCP server; however, the access points do not share
DHCP client databases. You should configure each DHCP server with a
different address pool from which to allocate client IP addresses.
To configure the access point as a DHCP server
1 From the menu, click TCP/IP Settings. The TCP/IP Settings screen
appears.
2 Verify that the IP Address field, IP Subnet Mask field, and IP Router
field are configured. For help, see "Configuring the TCP/IP Settings"
on page 60.
3 In the DHCP Mode field, choose This AP is a DHCP Server.
4 In the DHCP Server Name field, enter the name for this access point
as a DHCP server.
5 Click Submit Changes to save your changes.
6 Click DHCP Server Setup. The DHCP Server Setup screen appears.
Chapter 3 — Configuring the Ethernet Network
63