Intermec MobileLAN access WA21 System Manual page 140

Chapter 5 — Configuring the Spanning Tree
126
To use IP tunnel frame type filters
1 From the main menu, click IP Tunnels > Frame Type Filters. The
Frame Type Filters screen appears.
2 For each frame type field, check or clear the check box to configure if
the frame types are passed or are dropped. If you check the check box,
the frame type is allowed to pass.
For each frame type field, set the Scope field to Unlisted or All.
For help, see the next table.
3 Click Submit Changes to save your changes. To activate your changes,
from the menu bar click Save/Discard Changes, and then click Save
Changes and Reboot. For help, see "Saving Configuration Changes"
on page 36.
4 If you set the Scope field to Unlisted for any of the frame types, you
must also configure predefined subtype filters or customizable subtype
filters. For help, see "Using Predefined Subtype Filters" on page 127 or
"Customizing Subtype Filters" on page 128.
MobileLAN access System Manual