Intermec MobileLAN access WA21 System Manual page 237

Purpose: Copies a file from a TFTP client to the TFTP server or to another access
Syntax:
Example: The following command takes file UAP.PRG that is saved in the active
Purpose: The access point can function as a TFTP server. You can use the TFTP
Syntax:
MobileLAN access System Manual
TFTP PUT
point.
TFTP PUT IPaddress foreignfilename localfilename
where:
IPaddress is the IP address or DNS name of the server. You can
use an asterisk (*) here if you want to use the value in
the serveripaddress.
foreignfilename is the name of the file as it will appear on the server.
The file name can contain directory path information
and must be in the format required by the server
operating system.
localfilename is the name of the file to be sent from the access
point.
boot drive on the access point client and stores it in the inactive boot
segment on the access point server that has IP address 1.2.3.4.
TFTP PUT 1.2.3.4 IB:UAP.PRG AB:UAP.PRG
The access point may generate these error messages when it issues a TFTP
PUT command. Other error messages may be returned from the server
and displayed by the access point. See your server documentation for
additional information.
Error Message
Can't read file
Invalid opcode during put
TFTP SERVER LOG
server log command to save a history of TFTP client requests. The TFTP
server log contains useful TFTP server status information. The log begins
when you set up the server. To clear the log, reboot the access point.
TFTP SERVER LOG
Chapter 9 — Additional Access Point Features
Explanation
The requested file may not exist.
This error should not occur under normal operating
conditions. This error indicates a TFTP protocol error that
will not occur when you use TFTP servers that conform to
the protocol.
223