Intermec MobileLAN access WA21 System Manual page 301

Using Avalanche to Manage Your Access Points
MobileLAN access System Manual Addendum
5 In the Avalanche Console Address field, enter the IP address or DNS
name of the console.
Or, leave this field blank and the access point sends out a broadcast
request looking for any available agent.
6 Click Submit Changes to save your changes.
7 From the main menu, click Security. The Security page appears.
8 Verify that the Allow Avalanche Access check box is checked.
9 Click Submit Changes to save your changes. To activate your changes,
from the menu bar click Save/Discard Changes, and then click Save
Changes and Reboot. For help, see "Saving Configuration Changes" in
your system manual.
10 Repeat Steps 1 through 9 for each access point.
Each time the access point is rebooted, it attempts to connect to the
Avalanche Agent. When the access point connects to the agent, the agent
determines whether an update is available and immediately starts the
software upgrade, file transfer, or configuration update. You can also
schedule these updates or you can manually initiate an update.
Note: The first time the access point locates the agent, it needs to
synchronize with the Avalanche system. On the agent, you must have
installed a software package that can be downloaded to the access point.
5