Intermec MobileLAN access WA21 System Manual page 163

MobileLAN access System Manual
Password Parameter Descriptions
Parameter Description
Use RADIUS for Determines if you are using a password server to authenticate
Login Authorization
end devices that can communicate with this access point. Clear
this check box.
User Name Enter the user name you need to use to log in to this access
point. This parameter can be from 0 to 16 characters long.
If you leave the user name and password fields blank, a user
will not need to log in to the access point.
Password Enter the password you need to use to log in to this access
point. This password gives you read and write access to the
access point configuration. This parameter can be from 0 to 16
characters long.
If you leave the user name and password fields blank, a user
will not need to log in to the access point.
Read Only Password Enter the password you need to use to log in to this access
point. This password gives the user read-only access to the
access point. This user is able to view the configuration and
execute diagnostics but cannot perform any tasks that affect the
operation of the access point, such as changing configuration
options, rebooting, or downloading software.
To disable this password, delete it.
Allow Service If the user enters a login that does not match either the user
Password name and password or the read only password, check this check
box to allow the login to be checked against the service
password. Intermec Technical Support may use this service
password if they need to troubleshoot this access point.
Chapter 6 — Configuring Security
149