Intermec MobileLAN access WA21 System Manual page 177

MobileLAN access System Manual
To configure a VLAN
1 From the main menu, click Spanning Tree Settings. The Spanning
Tree Settings screen appears.
2 Configure the Enable GVRP for VLAN check box.
• Check the check box if the VLAN switch is configured to
dynamically configure its ports based on the end devices' needs.
• Clear the check box if the VLAN switch is statically configured to
always forward specific VLANs to specific ports.
3 Click Submit Changes to save your changes.
4 From the main menu, click Security and then click the radio security
that you are configuring. This screen appears.
5 In the VLAN field, enter the VLAN number that encapsulates all frames
received on this radio port. This value must match the values that are set
in the VLAN-capable Ethernet switches on the primary LAN.
Chapter 6 — Configuring Security
163