Intermec MobileLAN access WA21 System Manual page 303

Important Information When Using Avalanche With Your Access Points
MobileLAN access System Manual Addendum
2 Install the software package using the Avalanche Management Console.
3 Schedule access point updates or manually initiate an update using the
console.
For more information on using the Wavelink Avalanche client
management system, see the Wavelink Avalanche documentation and
online help. Or, visit the Wavelink web site at www.wavelink.com.
• If your access point is a DHCP server and Avalanche contains a network
profile for the access point that assigns IP addresses from a DHCP
server, the access point will lose its static IP address. Any devices that
were supposed to receive an IP address from the access point will not
succeed.
• If you are using the MobileLAN access Utility to recover a failed access
point and you are using Avalanche to manage the access point, the
recovery process may fail.
• If you change security parameters in your wireless network and you are
using Avalanche, make sure that you update the security parameters on
your end devices before you update the security parameters on your
access point. Otherwise, you will lose connectivity between your end
devices and your access point.
7