Intermec MobileLAN access WA21 System Manual page 189

MobileLAN access System Manual
Chapter 7 — Configuring the Embedded Authentication Server (EAS)
7 Repeat Steps 3 through 6 for each client.
8 Click Save/Discard changes, and then click Save Changes without
Reboot.
Embedded Authentication Server Entry Descriptions
Type Description
Login Enter user names and passwords for
users who are authorized to
configure and maintain access
points using the password server.
RADIUS Enter a secret key that is shared by
the RADIUS client (access point)
and the RADIUS server.
You do not need to enter any
RADIUS clients if you do not
change the default secret key.
For more security, you should
change the default secret key.
ACL Enter the end device radio MAC
address for all end devices that are
authorized to communicate with
the network.
(902 MHz WAP only) Enter the
Ethernet MAC address for all
WAPs that are authorized to
communicate with the network.
802.1x Enter the login name and password
(TTLS/PEAP)
of all end devices that are
authorized to communicate with
the 802.1x-enabled network.
For more security, you should
delete the user name "anonymous"
and the password "anonymous."
802.1x (TLS) Enter the client certificate common
name of all end devices that are
authorized to communicate with
the 802.1x-enabled network.
User Name Password
User name User
password
RADIUS Secret key
client IP
address
MAC address None
End device End device
login name
login
password
Client None
certificate
common
name
175