Intermec MobileLAN access WA21 System Manual page 218

Chapter 8 – Managing, Troubleshooting, and Upgrading Access Points
204
For help installing the MobileLAN access utility, see "Using the
MobileLAN access Utility" in Chapter 1.
To upgrade the access point software
1 Start the utility.
2 In the Upgrade File Location field, enter the path and filename of the
upgrade file (AP*WEB.BIN) or click Browse to find the file. For
example, AP180WEB.BIN.
3 Click Start. The utility must remain active until the upgrade procedure
is complete; do not close the utility.
4 Configure the root access point to retrieve the software.
From the Actions menu, click Configure Access Point, and then
a
enter the IP address of the root access point. A web browser session is
established.
From the menu bar, click Distributed Network Upgrade. The
b
Distributed Network Upgrade screen appears.
MobileLAN access System Manual