Intermec MobileLAN access WA21 System Manual page 47

MobileLAN access System Manual
7 If you are not using a DHCP server, you need to manually assign an IP
address. Configure these parameters in the TCP/IP Settings menu:
IP Address A unique IP address.
IP Subnet Mask The subnet mask that matches the other devices in your
network.
IP Router If the access point will communicate with devices on another
(Gateway) subnet, enter the address of the router that will forward
frames.
Or, if you are using a DHCP server to automatically assign an IP
address to your access point, configure these parameters in the TCP/IP
Settings menu:
DHCP Mode Set to <Use DHCP if IP Address is Zero>.
DHCP Server The name of the DHCP server that the access point is to
Name
access for automatic address assignment. If no server name is
specified, the access point responds to offers from any server.
8 Press Esc to return to the Access Point Configuration menu.
9 Choose Save Configuration.
10 Choose Reboot.
When the access point is done rebooting, you are ready to install the access
point in your network. See Chapter 2, "Installing the Access Points."
Chapter 1 — Getting Started
33