Intermec MobileLAN access WA21 System Manual page 229

Purpose: Reboots the access point.
Syntax:
Purpose: Makes an inactive segment the active segment.
Syntax:
Example: To make segment 2 the active boot segment and segment 4 the active data
MobileLAN access System Manual
To list service commands
• Press any key (except the letter B, which reboots the access point), and
then press Enter. The service commands appear on the screen.
Many of the commands that are available in Service mode are also
available in the AP monitor or Console Command mode.
B
B
FB
FB bootsegment (datasegment)
where:
bootsegment is the name or number of the boot segment to be activated.
datasegment is the optional name or number of the data segment to be
activated.
segment, enter:
FB 2 4
You can use an asterisk instead of a segment name if you want to leave that
segment unchanged. For example, to leave the active boot segment
unchanged and make segment 4 the active data segment, you could enter:
FB * 4
After loading software into the access point a common task is to activate
the new software. To activate the new software, enter:
FB IB: ID:
Chapter 9 — Additional Access Point Features
215