Intermec MobileLAN access WA21 System Manual page 231

Purpose: Erases the files in a particular segment. To recover the files after they have
Syntax:
Example: To erase the contents of segment 1, enter:
Purpose: Runs a program
Syntax:
Example: To run program UAPBOOT.PRG from segment 1, enter:
Purpose: Reinitializes the access point file system. If the access point file system or a
Syntax:
Purpose: Downloads a file using Ymodem batch protocol into the flash segment
Syntax:
MobileLAN access System Manual
FE
been erased, you must reload them from another source.
Note: You must execute this command before you execute a TFTP
transfer.
FE s
where s is the name or number of the segment to be erased. You can enter
instead of a segment name or number if you want to erase all
ALL
segments.
FE 1
To erase the contents of the inactive boot segment, enter:
FE IB:
FFR
, from a location
f
FFR f (s)
where:
f is the program name.
s is the optional segment location of the program.
FFR UAPBOOT.PRG 1
FI
file segment becomes corrupt, use this command to reset it.
FI (s)
where s is the optional number of the segment to be reinitialized.
FX
that is specified by .
s
FX s
where s is segment 1, 2, 3, or 4.
Chapter 9 — Additional Access Point Features
.
s
217