Intermec MobileLAN access WA21 System Manual page 238

Chapter 9 — Additional Access Point Features
Purpose: Use this command to enable the access point to act as a server. You can
Syntax:
Purpose: When you are done transferring files, you can stop the access point from
Syntax:
224
TFTP SERVER START
enable one access point to act as a TFTP server and download files to
additional access points.
TFTP SERVER START
After you issue this command, the access point responds to TFTP client
requests that are directed to its IP address. When acting as a server, the
access point supports up to four concurrent TFTP sessions.
TFTP SERVER STOP
being a TFTP server by using this command.
TFTP SERVER STOP
After you issue this command, the access point no longer responds to
TFTP client requests; however, current TFTP sessions with the server are
allowed to complete. This table lists error messages that can be issued from
the TFTP server. These messages are sent to the client and are meant to be
read from the client perspective.
Error Message
TFTP server only
supports octet mode
Unable to open remote
file
Can't read remote file
Can't write remote file
TFTP opcode not read
or write request
Invalid opcode during
read
Invalid opcode during
write
Explanation
The client is attempting to transfer a file in ASCII mode. The
access point TFTP server only supports octet mode, which
includes binary and image.
The TFTP server cannot open the file that is named in the
read or write request. If you are trying to read a file, the file
may not exist. If you are trying to write a file, the file may be
too big, the file may not have a access point file header, or the
file name may be incorrectly formed.
The server returns this message if the access point file system
returns an error while the server is attempting to read the file.
This message is unlikely to occur.
The server returns this message if the access point file system
returns an error while the server is attempting to write the file.
This message is unlikely to occur.
This error should not occur under normal operating
conditions. This error indicates that the TFTP client does not
conform to the protocol.
This error should not occur under normal operating
conditions. This error indicates that the TFTP client does not
conform to the protocol.
This error should not occur under normal operating
conditions. This error indicates that the TFTP client does not
conform to the protocol.
MobileLAN access System Manual