Intermec MobileLAN access WA21 System Manual page 46

Chapter 1 — Getting Started
32
2 Start the communications program and configure the serial port
communications parameters on your PC, and then click OK. You
should configure the serial port communications parameters to:
Bits per second 115200
Data bits 8
Parity None
Stop bit 1
Flow control None
3 Connect the access point to power. The access point has no On/Off
switch, so it boots as soon as you apply power.
4 Press Enter when the message "
PC screen. The Username field appears.
5 In the Username field type the default username
press Enter.
6 In the Password field type the default password
press Enter. The Access Point Configuration menu appears.
" appears on your
Starting system
Intermec
Intermec
MobileLAN access System Manual
, and then
, and then