Intermec MobileLAN access WA21 System Manual page 169

MobileLAN access System Manual
• WEP 128 provides a higher degree of encryption protection. It has four
104-bit encryption keys and one 24-bit IV key. Enter 13 ASCII
characters or hex pairs.
• WEP 152 provides the highest degree of encryption protection. It has
four 128-bit encryption keys and one 24-bit IV key. Enter 16 ASCII
characters or hex pairs.
To configure WEP 64/128/152 security
1 From the main menu, click Security > IEEE 802.11b Radio Security
or IEEE 802.11a Radio Security. The appropriate radio screen
appears.
2 Check the Enable WEP Encryption check box, and then click Submit
Changes.
3 Configure the parameters for WEP configuration. To ensure maximum
security, configure each WEP key with a different WEP code. For help,
see the next table.
4 Click Submit Changes to save your changes. To activate your changes,
from the menu bar click Save/Discard Changes, and then click Save
Changes and Reboot. For help, see "Saving Configuration Changes"
on page 36.
Chapter 6 — Configuring Security
155