Intermec MobileLAN access WA21 System Manual page 165

MobileLAN access System Manual
2 Check the Secure IAPP check box.
3 Click Submit Changes to save your changes.
4 In the IAPP Secret Key field, enter a secret key. This secret key must be
between 16 and 32 bytes.
5 Determine how the access points authenticate to the network.
• Check the Allow SWAP check box if you have older access points or
you are not implementing an 802.1x security solution.
• Check the Allow TLS check box, if you are implementing an 802.1x
security solution and you want to use TLS. The access point must
have a client certificate loaded on it.
• Check the Allow TTLS check box, if you are implementing an
802.1x security solution and you want to use TTLS. You must also
enter a User Name and Password that matches an entry in the
authentication server.
6 Click Submit Changes to save your changes. To activate your changes,
from the menu bar click Save/Discard Changes, and then click Save
Changes and Reboot. For help, see "Saving Configuration Changes"
on page 36.
7 Repeat Steps 1 through 6 for each access point in your spanning tree.
All access points must have the same IAPP secret key to communicate
with each other.
In the access point that contains the master radio, click Maintenance > AP
Connections. The AP Connections screen lists the station radios
(including ones in other access points) that are communicating with the
master radio. For help, see "Viewing AP Connections" in Chapter 8.
Chapter 6 — Configuring Security
151