Intermec MobileLAN access WA21 System Manual page 197

MobileLAN access System Manual
Chapter 8 – Managing, Troubleshooting, and Upgrading Access Points
To configure the SNMP community strings
1 From the menu, click Network Management. The Network
Management screen appears.
2 Configure the SNMP community parameters. For help, see the next
table.
3 Click Submit Changes to save your changes. To activate your changes,
from the menu bar click Save/Discard Changes, and then click Save
Changes and Reboot. For help, see "Saving Configuration Changes"
on page 36.
SNMP Community Parameter Descriptions
Parameter Description
SNMP Read Specify a password that provides read-only access. This password
Community can be from 1 to 15 characters and is case sensitive.
SNMP Write Specify a password that provides read and write access. This
Community password can be from 1 to 15 characters and is case sensitive.
SNMP Secret Specify a password that provides read and write access and lets
Community the user change the community strings. This password can be
from 1 to 15 characters and is case sensitive.
183