Intermec MobileLAN access WA21 System Manual page 87

MobileLAN access System Manual
3 In the SubType field, choose the customizable frame subtype. For help,
see the next table.
4 In the Value field, enter the two hex pairs. For help, see the next table.
5 Click Submit Changes to save your changes. To activate your changes,
from the menu bar click Save/Discard Changes, and then click Save
Changes and Reboot. For help, see "Saving Configuration Changes"
on page 36.
Subtype Filter Descriptions
Subtype Value
DIX-IP-TCP-Port Port value in hexadecimal.
DIX-IP-UDP-Port Port value in hexadecimal.
DIX-IP-Protocol Protocol number in hexadecimal.
DIX-IPX-Socket Socket value in hexadecimal.
DIX-EtherType Specify the registered DIX type in hexadecimal.
SNAP-IP-TCP-Port Port value in hexadecimal.
SNAP-IP-UDP-Port Port value in hexadecimal.
SNAP-IP-Protocol Port value in hexadecimal.
SNAP-IPX-Socket Socket value in hexadecimal.
SNAP-EtherType SNAP type in hexadecimal. To filter on both SNAP type and
OUI, use advanced filters.
802.3-IPX-Socket Socket value in hexadecimal.
802.2-IPX-Socket Socket value in hexadecimal.
802.2-SAP 802.2 SAP in hexadecimal.
Example
This example shows you how to use customizable filters to only allow the
wireless end devices (DHCP clients) that are communicating with the
access point (DHCP server) to receive TCP/IP settings. This example
prevents the wireless end devices from receiving TCP/IP settings from
another DHCP server on the Ethernet network. It also prevents the access
point from providing TCP/IP settings to DHCP clients on the wired
network.
Chapter 3 — Configuring the Ethernet Network
73