Enabling The Pse To Detect Nonstandard Pds; Displaying And Maintaining Poe - 3Com 4210G Series Configuration Manual

If you adjust the PD disconnection detection mode when the device is running, the connected PDs will
be powered off. Therefore, be cautious to do so.

Enabling the PSE to Detect Nonstandard PDs

There are standard PDs and nonstandard PDs. Usually, the PSE can detect only standard PDs and
supply power to them. The PSE can detect nonstandard PDs and supply power to them only after the
PSE is enabled to detect nonstandard PDs.
Follow these steps to enable the PSE to detect nonstandard PDs:
To do...
Enter system view
Enable the PSE to detect
nonstandard PDs

Displaying and Maintaining PoE

Display the mapping between ID,
module, and member ID of all PSEs.
Display the power state and
information of the specified PoE
interface
Display the power information of a
PoE interface(s)
Display the information of PSE
Display the power state and
information of all PoE interfaces
connected with the PSE
Display the power of all PoE interfaces
connected with the PSE
Display all information of the
configurations and applications of the
PoE configuration file
Display all information of the
configurations and applications of the
PoE configuration file applied to the
specified PoE interface
Use the command...
system-view
poe legacy enable pse pse-id
To do... Use the command...
display poe device
display poe interface [ interface-type
interface-number ]
display poe interface power
[ interface-type interface-number ]
display poe pse [ pse-id ]
display poe pse pse-id interface
display poe pse pse-id interface power
display poe-profile [ index index |
name profile-name ]
display poe-profile interface
interface-type interface-number
29-7
Remarks
—
Optional
Disabled by default.
Remarks
Available in
any view