Cisco 7945G Administration Manual page 89

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Table 4-13 Media Configuration Menu Options (continued)
Option Description
Recording Tone Indicates the loudness setting for the beep tone that is
Local Volume received by the party whose phone has the Recording Tone
option enabled.
This setting applies for each listening device (handset,
speakerphone, headset).
Range: 0 percent (no tone) to 100 percent (same level as
current volume setting on the phone).
Default: 100
See also: Recording Tone
Recording Tone Indicates the loudness setting for the beep tone that the
Remote Volume remote party receives. The remote party is the party who is on
a call with the party whose phone has the Recording Tone
option enabled.
Range: 0 percent to 100 percent. (0 percent is –66 dBM and
100 percent is –3 dBM.)
Default: 84 percent (–10dBM)
See also: Recording Tone
Recording Tone Indicates the length of time in milliseconds that the beep
Duration tone plays.
If the value you configure here is less than one third the
interval, then this value overrides the default provided by
the Network Locale.
Range: 0 to 3000
Note
See also: Recording Tone
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.1(3)
OL-17755-01
For some Network Locales that use a complex
cadence, this setting applies only to the first beep
tone.
Device Configuration Menu
To Change
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone
Configuration.
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone
Configuration.
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone
Configuration.
4-21