Cisco 7945G Administration Manual page 78

Network Configuration Menu
Table 4-3 IPv4 Configuration Menu Options (continued)
Option Description
TFTP Server 1 Primary Trivial File Transfer Protocol (TFTP) server used
by the phone. If you are not using DHCP in your network
and you want to change this server, you must use the TFTP
Server 1 option.
If you set the Alternate TFTP option to yes, you must enter
a non-zero value for the TFTP Server 1 option.
If neither the primary TFTP server nor the backup TFTP
server is listed in the CTL file on the phone, you must
unlock the CTL file before you can save changes to the
TFTP Server 1 option. In this case, the phone will delete
the CTL file when you save changes to the TFTP Server 1
option. A new CTL file will be downloaded from the new
TFTP Server 1 address.
For information about the CTL file, refer to Cisco Unified
Communications Manager Security Guide. For information
about unlocking the CTL file, see the
Configuration Menu" section on page
TFTP Server 2 Optional backup TFTP server that the phone uses if the
primary TFTP server is unavailable.
If neither the primary TFTP server nor the backup TFTP
server is listed in the CTL file on the phone, you must
unlock the CTL file before you can save changes to the
TFTP Server 2 option. In this case, the phone will delete
the CTL file when you save changes to the TFTP Server 2
option. A new CTL file will be downloaded from the new
TFTP Server 2 address.
For information about the CTL file, refer to Cisco Unified
Communications Manager Security Guide. For information
about unlocking the CTL file, see to the
Configuration Menu" section on page
BOOTP Server Indicates whether the phone obtains its configuration from
a Bootstrap Protocol (BootP) server instead of from a
DHCP server.
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.1(3)
4-10
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
To Change
1.
2.
3.
4.
Note
"Security
4-31.
1.
2.
3.
4.
5.
"Security
4-31.
Note
Display only—Cannot configure.
Unlock the CTL file if necessary (for
example, if you are changing the
administrative domain of the phone).
If DHCP is enabled, set the Alternate
TFTP option to Yes.
Scroll to the TFTP Server 1 option,
press the Edit softkey, and then enter
a new TFTP server IP address.
Press the Validate softkey, and then
press the Save softkey.
If you forgot to unlock the CTL
file, you can change the TFTP
Server 1 address in the CTL file,
then erase the CTL file by pressing
the Erase softkey from the
Security Configuration menu. A
new CTL file will be downloaded
from the new TFTP Server 1
address.
Unlock the CTL file, if necessary (for
example, if you are changing the
administrative domain of the phone).
Unlock network configuration
options.
Enter an IP address for the TFTP
Server 1 option.
Scroll to the TFTP Server 2 option,
press the Edit softkey, and then enter
a new backup TFTP server IP address.
Press the Validate softkey, and then
press the Save softkey.
If you forgot to unlock the CTL
file, you can change the TFTP
Server 2 address in the CTL file,
then erase the CTL file by pressing
the Erase softkey from the
Security Configuration menu. A
new CTL file will be downloaded
from the new TFTP Server 2
address.
OL-17755-01