Cisco 7945G Administration Manual page 75

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Table 4-2 Network Configuration Menu Options (continued)
Option Description
PC Port Speed and duplex of the access port (labeled 10/100/1000 PC).
Configuration Valid values:
•
•
•
•
•
•
If the phone is connected to a switch, configure the port on the
switch to the same speed/duplex as the phone, or configure both to
auto-negotiate.
If you change the setting of this option, you should change the SW
Port Configuration option to the same setting. This ensures that the
PC receives the full benefits of the network operating speed.
PC VLAN Allows the phone to interoperate with 3rd party switches that do
not support a voice VLAN. The Admin VLAN ID option must be
set before you can change this option.
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.1(3)
OL-17755-01
Auto Negotiate
10 Half—10-BaseT/half duplex
10 Full—10-BaseT/full duplex
100 Half—100-BaseT/half duplex
100 Full—100-BaseT/full duplex
1000 Full—1000-BaseT/full duplex
Network Configuration Menu
To Change
Unlock network configuration
1.
options.
Scroll to the PC Port
2.
Configuration option and then
press the Edit softkey.
3. Scroll to the setting that you
want and then press the Select
softkey.
Press the Save softkey.
4.
Unlock network configuration
1.
options.
Make sure the Admin VLAN
2.
ID option is set.
3. Scroll to the PC VLAN
option, press the Edit softkey,
and then enter a new PC
VLAN setting.
Press the Validate softkey and
4.
then press the Save softkey.
4-7