Cisco 7945G Administration Manual page 107

Chapter 5 Configuring Features, Templates, Services, and Users
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description
Auto Answer Connects incoming calls automatically after a ring or
two.
Auto Answer works with either the speakerphone or the
headset.
Auto Dial Allows the phone user to choose from matching
numbers in the Placed Calls log while dialing. To place
the call, the user can choose a number from the Auto
Dial list or continue to enter digits manually.
Auto-pickup Allows a user to use one-touch, pickup functionality for
call pickup, group call pickup, and other group call
pickup.
Barge (and cBarge) Allows a user to join a non-private call on a shared
phone line. Barge features include cBarge and Barge.
•
•
The phones support Barge in two conference modes:
•
•
Block external to Prevents users from transferring an external call to
external transfer another external number.
Busy Lamp Field Allows a user to monitor the call state of a directory
(BLF) speed dial number (DN) associated with a speed-dial button.
Busy Lamp Field Provides enhancements to BLF speed dial. Allows you
(BLF) Pickup to configure a Directory Number (DN) that a user can
(SCCP only) monitor for incoming calls. When the DN receives an
incoming call, the system alerts the monitoring user,
who can then pick up the call.
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.1(3)
OL-17755-01
cBarge adds a user to a call and converts it into a
conference, allowing the user and other parties to
access conference features.
Barge adds a user to a call but does not convert the
call into a conference.
Built-in conference bridge at the target device (the
phone that is being barged). This mode uses the
Barge softkey.
Shared conference bridge. This mode uses the
cBarge softkey.
Telephony Features Available for the Phone
Configuration Reference
For more information, refer to Cisco Unified
Communications Manager Administration
Guide, "Directory Number Configuration"
chapter.
For more information, refer to the Cisco
Unified Communications Manager Features
and Services Guide, "Call Pickup
Configuration" chapter.
For more information, refer to:
Cisco Unified Communications Manager
•
Administration Guide, "Cisco Unified IP
Phone Configuration" chapter.
Cisco Unified Communications Manager
•
System Guide, "Cisco Unified IP
Phones" chapter.
Cisco Unified Communications Manager
•
Features and Services Guide, "Barge
and Privacy" chapter.
For more information, refer to Cisco Unified
Communications Manager Features and
Services Guide, "External Call Transfer
Restrictions" chapter.
For more information, refer to Cisco Unified
Communications Manager Features and
Services Guide, "Presence" chapter.
For more information, refer to Cisco Unified
Communications Manager Feature and
Services Guide, "Call Pickup" chapter.
5-3