Security Configuration Menu - Cisco 7945G Administration Manual

Chapter 4 Configuring Settings on the Cisco Unified IP Phone

Security Configuration Menu

The Security Configuration menu that you display from the Device Configuration menu displays settings
that relate to security for the phone.
Note The phone also has a Security Configuration menu that you access directly from the Settings menu. For
information about the security options on that menu, see the
page
Table 4-16
Table 4-16 Security Configuration Menu Options
Option Description
PC Port Disabled Indicates whether the access port on the phone is enabled or
disabled.
Note
GARP Enabled Indicates whether the phone learns MAC addresses from
Gratuitous Address Resolution Protocol (ARP) responses.
Disabling the phone's ability to accept Gratuitous ARP will
prevent applications that use this mechanism to monitor and
record voice streams from working. If voice monitoring is
not desired, set this option to No (disabled).
Voice VLAN Indicates whether the phone allows a device attached to the
Enabled access port to access the Voice VLAN. Setting this option
to No (disabled) prevents the attached PC from sending and
receiving data on the Voice VLAN. This setting also
prevents the PC from receiving data sent and received by
the phone. Set this setting to Yes (enabled) if an application
that requires monitoring of the phone's traffic is running on
the PC. These applications include monitoring and
recording applications and network monitoring software.
Web Access Indicates whether web access is enabled (Yes) or disabled
Enabled (No) for the phone.
Security Mode Displays the security mode that is set for the phone.
Logging Display For use by the Cisco Technical Assistance Center (TAC), if necessary.
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.1(3)
OL-17755-01
4-31.
describes the options on the Security Configuration menu.
If disabled, video will not work on this phone, even
if video is enabled.
Device Configuration Menu
"Security Configuration Menu" section on
To Change
From Cisco Unified Communications
Manager Administration, choose Device >
Phone > Phone Configuration.
From Cisco Unified Communications
Manager Administration, choose Device >
Phone > Phone Configuration.
From Cisco Unified Communications
Manager Administration, choose Device >
Phone > Phone Configuration.
From Cisco Unified Communications
Manager Administration, choose Device >
Phone > Phone Configuration.
Use Cisco Unified Communications
Manager Administration to modify.
4-25