Locale Configuration Menu - Cisco 7945G Administration Manual

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Table 4-9 HTTP Configuration Menu Options (continued)
Option Description
Idle URL URL of an XML service that the phone displays when the
phone has not been used for the time specified in the Idle
URL Time option and no menu is open. For example, you
could use the Idle URL option and the Idle URL Timer
option to display a stock quote or a calendar on the LCD
screen when the phone has not been used for 5 minutes.
Idle URL Time Number of seconds that the phone has not been used and no
menu is open before the XML service specified in the Idle
URL option is activated.

Locale Configuration Menu

The Locale Configuration menu displays information about the user locale and the network locale used
by the phone.
Table 4-10 Locale Configuration Menu Options
Option Description
User Locale User locale associated with the phone user. The user
locale identifies a set of detailed information to support
users, including language, font, date and time formatting,
and alphanumeric keyboard text information.
User Locale Version of the user locale loaded on the phone.
Version
User Locale Char Character set that the phone uses for the user locale.
Set
Network Locale Network locale associated with the phone user. The
network locale identifies a set of detailed information that
supports the phone in a specific location, including
definitions of the tones and cadences used by the phone.
Network Locale Version of the network locale loaded on the phone.
Version
NTP Configuration Provides access to the NTP Configuration Menu. For
(SIP phones only) more information, see the
(SIP Phones Only)" section on page 4-18
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.1(3)
OL-17755-01
Table 4-10 describes the options on this menu.
"NTP Configuration Menu
Device Configuration Menu
To Change
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone Configuration.
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone Configuration.
To Change
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone Configuration.
Display only—cannot configure.
Display only—cannot configure.
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone Configuration.
Display only—cannot configure.
From Cisco Unified Communications
Manager Administration, choose System >
Phone NTP Reference.
4-17