Editing Values - Cisco 7945G Administration Manual

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Table 4-1 Settings Configurable from the Phone (continued)
Category Description
TFTP settings If you do not use DHCP to direct the phone to a TFTP server, you must
manually assign a TFTP server. You can also assign an alternative
TFTP server to use instead of the one assigned by DHCP.
Related Topics
•
•
•
•
•
Network Configuration Menu
The Network Configuration menu provides options for viewing and making a variety of network settings.
Table 4-2
For information about how to access the Network Configuration menu, see the
Configuration Menu" section on page
The phone also has a Network Configuration menu that you access directly from the Settings menu. For
Note
information about the options on that menu, see the
Before you can change an option on this menu, you must unlock options as described in the
and Locking Options" section on page
configuration options appear only if options are unlocked.
For information about the keys you can use to edit options, see the
Table 4-2 Network Configuration Menu Options
Option Description
IPv4 Configuration In the IPv4 Configuration menu, you can do the following:
Enable or disable the phone to use the IP address that is assign by
the DHCP server.
Manually set the IP Address, Subnet Mask, Default Routers, DNS
Server, and Alternate TFTP servers.
For more information on the IPv4 address fields, refer to
Table
IPv6 Configuration This menu setting is disabled in this release.
MAC Address Unique Media Access Control (MAC) address of the phone.
Host Name Unique host name that the DHCP server assigned to the phone.
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.1(3)
OL-17755-01
Displaying a Configuration Menu, page 4-2
Unlocking and Locking Options, page 4-3
Editing Values, page 4-3
Network Configuration Menu, page 4-5
Device Configuration Menu, page 4-11
and Table 4-3 describe these options and, where applicable, explains how to change them.
4-3.
4-2.
"Network Configuration" section on page
4-3. The Edit, Yes, or No softkeys for changing network
Network Configuration Menu
Network Configuration Menu
Option
TFTP Server 1
Alternate TFTP
TFTP Server 2
"Displaying a
"Unlocking
"Editing Values" section on page
To Change
Unlock network configuration
1.
options.
Scroll to IPv4 Configuration
2.
and press the Select softkey.
Display only—Cannot configure.
Display only—Cannot configure.
4-27.
4-3.
4-5