Scanning In Hollerith Check Mode; Settings In The Control Window - Oce 3000 User Manual

Scanning in Hollerith Check mode

The Océ 3000 Microfilm Scanner feeds a card, scans the card and displays the
Hollerith data in the Run-Time Display window. Errors in the Hollerith coding
can be corrected with edit in the Run-Time Display window.
This mode is not useful when the aperture cards are not punched.
Note:

Settings in the Control window

Before starting the scanner, you set the scanning controls in the Control
window.
To start a scanning session in Hollerith Check mode:
Click the Hollerith Check button in the Running Mode entry box.
1
Select the Hollerith in the Input Size entry box.
2
Select the required Output Mode.
3
If the output mode is set to Print or Print/File, set the Print Control settings as
4
required.
Place the aperture cards in the input hopper.
5
Click the Start button to start the scanning session.
6
If required, set the names for image files and log file (see figures 9 and 10 on
7
page 22).
The system switches to the Run-Time Display window (see figure 12 on
page 30).
Scanning 29