Print Sequence; Rcf File - Oce 3000 User Manual

The setup window for your local Windows printer appears.
Specify the setup as required and click OK to return to the Printer Setup
4
window.
Click OK.
5
The Printer Setup window disappears and you return to the Control window.
To set the Generic (TIFF) Printer as default printer:
Click Generic Printer in the list of installed printers.
1
Click Set As Default Printer.
2
'Generic Printer' appears in the Default Printer box in the top of the Printer
Setup window.
Click OK.
3
The Printer Setup window disappears and you return to the Control window.

Print sequence

You can influence the print sequence of a pack of cards, by changing the way
of loading the cards: face up or face down. In the Configuration menu you can
select the way of loading cards (see 'Configuration' on page 85).
In this way the printed copies can be delivered in the same sequence as the
pack of cards: the card on top will be printed on top.
RCF file
For the Océ 9400/9500/9700/9800 printer, one or more RCF files can be
installed. An RCF file contains printer settings, defined by RCF commands.
You can select one RCF file to be sent to the printer before printing an image.
In this way you can define detailed printer settings, or reset the Océ printer to
a default status.
A standard RCF file is always installed for each applicable printer.
Printer settings in the Control window will overrule the settings in the
Note:
RCF file.
72 Océ 3000 User Manual